1. Home
2. Forums
3. Technical Troubleshooting
4. Clark
5. TMG17

Clark TMG17:
ERROR 05 CLARK TMG17

que suerte que tenes jorge! al menos dos personas respondieron a tu problema!
jjajajaja a mi nadie me respondio nada!

• Posted 1 Jul 2020 07:57
• Reply by Armando_Barreda
• Argentina

Post a Reply Report this post

hi tony do you know the code -06 , -30 TGM20 clark ?

• Posted 1 Jul 2020 02:11
• Reply by jaime_r
• California, United States

jaime romero

Post a Reply Report this post

Hey Jorge,
Code -05 on the TMG indicates an open circuit in the brake switch or 1MS switch in the accelerator. If this unit has been wet I'd go with the accelerator but the brake switch is easier to check. If the brake switch or 1MS switch are open during start up the controller will not operate.
Good luck and let us know how you do.
Troy

• Posted 1 Mar 2009 01:44
• Reply by troy_m
• Ontario, Canada

A-Lift Services -- safe -reliable -affordable

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.