Code 35. Discussion about troubleshooting Doosan

Code 35

Keithr
Wisconsin, United States

Posted 26 Jan 2017 03:22 AM

Check engine light on, found the procedure to pull code from dash in another thread and have a reoccurring code 35.
Backfires intermittent upon startup. Cleared the code but it returns.
What is 35?
Recently replaced spark plugs, lp filter, has a new electric throttle body, the gear teeth were stripped off from the backfires
Please help.

Reply Report

Post reply

Showing items 1 - 2 of 2 results.

Sort messages by:

tom_p
Alberta, Canada

Posted 21 Feb 2017 04:48 AM

I can find no fault 35 in the doosan list. Be sure to change the PCV (use doosan PCV) valve and confirm all vacuum lines and hoses are intact. What engine and fuel system do you have? If Woodward, check mixer diaphragm for damage or wear.

Reply Report

drew_b
Massachusetts, United States

Posted 3 Mar 2017 12:31 PM

Hey man you are reading the code wrong its a 353 code which is an issue with the tmap, either the sensor is bad or there is a break in the wiring.

Reply Report

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.