Hello, I have a H18CT-02 and I have the issue of losing my drive.
It will be operating fine then I lose the drive forward and reverse and a light comes on the control panel. To get it going again I turn the key off and restart and it works fine until the next time.
Can anyone help with this problem.
Showing items 1 - 4 of 4 results.
I believe the issue is in the accelerator assembly. There are 3 (I think) plastic gears and if they have the slightest wear will cause this issue. Replace the gears and accelerator potentiometer and it should cure the problem
Hi Bob, your mchine was very old for me , commonly for 350 the diagnostic 4 poles connector is located below the hydraulic control levers, then you need a truck doctor diagnostic or linde test module to connect and read the error codes.
Where would I find the error codes? The light is on the panel with the head lights the same light as when you first turn the key on before starting.
Serial number is 350J04310518.
HI, what is the error code when a light comes on the dsplay?
what is the serial number of machine?
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.