Mitsubishi help code 31 - Technical Troubleshooting discussion in Forkliftaction's forums

Mitsubishi 2FBC18:
Mitsubishi help code 31

Hey everyone, kinda stuck here. I have a Mitsubishi 2FBC18 serial A2BC1-60157 that has error code 31 on startup. I can hear the line contactor pull closed and the immediately open again, then the core 31 comes up. Any help would be awesome, what is this code for? Pump contactor? Control card?

Posted 7 Sep 2016 02:19
Discussion started by Coolguy1
Ohio, United States

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

coolguy,
you question about this code was answered here:
ht tp://www.forkliftaction.com/forum/discussion_20826.htm

remove the space i added to the http to go to that thread

Posted 8 Sep 2016 14:09
Reply by swoop223
North Carolina, United States

You've been swooped!
swoop223@gmail.com

Post a Reply Report this post

Coolguy1. This is an old truck, code 31 is failure in the pump driver board logic. check all the diodes and transistors in the pump system if nothing found it could be your logic or driver board for the pump.

Posted 8 Sep 2016 00:27
Reply by Support
West Mids, United Kingdom

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.