Showing items 1 - 4 of 4 results.
No, l/h control pod is the one with the keyswitch, r/h control pod is the one with the twist grip.
If ed contactor is not pulling in, and there is voltage to controller, ed -ve is from mrc1, +ve is after both emergency stop swtiches,
Is the l/h control pod the panel where you plug in the battery charger?
I would pull the l/h control pod off and check the connector is fully inserted and none of the terminals are loose. It should show a CAN fault but its worth a look before replacing the main controller.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.