lp fuel - Design & Engineering discussion in Forkliftaction's forums

Discussion:
lp fuel

I have an old s150A with a continental f245 engine and impco model j and a c125 carb. I have replace diaphram and model j and if you don't choke it it won't run. It is running too lean I have moved power valve back from lean to rich and no difference. What do I do now?

Posted 18 Aug 2008 08:45
Discussion started by wellfred
Kentucky, United States

keep smiling

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

The big screw on the side of the c125 is the idle mixture.
Clockwise=richen.
The power valve under the fuel inlet is for top-end adjustment.

Impco's don't work well with worn-out engines, not enough vaccumn...

Impco has a kit availible, to increase the fuel pressure of the vapourizer. It works well, I've used them when converting LPG to CNG. P/N on the bag is ACI.74 600623.

Hope that helps...

Posted 19 Aug 2008 02:29
Reply by mike_n
Alberta, Canada

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.