1. Home
  2. Forums
  3. Technical Troubleshooting

Clark TMX15S:
Code 80

I have a lift with a code 80 which is forward and reverse input are both active when I put it in reverse. It goes forward in forward and neutral. I have replaced the micro switches and lever because they worn and I thought the problem was coming from there. Any help would be appreciated
  • Posted 29 Jun 2016 00:12
  • Discussion started by dwane_a
  • North Carolina, United States
Post a ReplyReport this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Showcased in the Virtual Expo

Global Industry News
edition #1228 - 1 May 2025
There is simply no ignoring the push for a greener, more sustainable materials handling equipment industry as manufacturers and customers alike seek eco-friendly solutions to reduce or eliminate carbon emissions... Continue reading
Machinery-onQ
Machinery-onQ.com is the one place to source and sell all your new and used machinery.
Find equipment for sale | Add a listing
VISIT
machinery-onQ.com
Machinery-onQ
From the forum discussions …
"Remove the coils and ohm out the pins. Coils take a different number than regular 4y plugs... If code is there then it is an ecu issue."
ron_k, United States
Read & Post in our Forums
Taylor TT300
Taylor TT300 1998
Coraopolis, Pennsylvania, United States
Used - Sale & Hire
USD98,500
SMV (Konecranes) 25-1200B
SMV (Konecranes) 25-1200B 2013
Balling, Denmark
Used - Sale
|
Forklift Diaries
Fact of the week
On average, people read 10-30% slower from a screen than from paper.
Taylor THC500L
Taylor THC500L 2008
Coraopolis, Pennsylvania, United States
Used - Sale & Hire
Hangcha CPYD32XW71F-C
Hangcha CPYD32XW71F-C
Flesherton, Ontario, Canada
New - Sale
|
Forklift Diaries
From the forum discussions …
"JLG 2630ES:...These lifts pots can be a hassle...if you replaced them..make sure you changed wiring..they come set normally open..."
Matthew_Reed, United States
Read & Post in our Forums
Upcoming in the editorial calendar
ARTIFICAL INTELLIGENCE
May 2025
Ask us about editorial contribution