1. Home
  2. Forums
  3. Technical Troubleshooting

Crown RM6000S:
code 832

Code 832.. for reach position sensor shuts off reach , tilt side shift functions.. can not calibrate... its reads 0.0 volts... there is 5 volts at the plug....any ideas if changing sensosr will fix problem?
  • Posted 4 Jun 2016 06:11
  • Discussion started by irrk1
  • Massachusetts, United States
Post a ReplyReport this post
Showing items 1 - 3 of 3 results.
I seem to be having a similar issue. I'm getting service codes #398 and #823 not accepting calibration for reach position sensor and tilt position sensor, showing 0 volts on display. Anyone have any suggestions would appreciate it, thanks
  • Posted 22 Mar 2017 02:54
  • Reply by stucktruck
  • New Jersey, United States
Post a Reply Report this post
wasnt the sensor.. i lost a ground over the mast... i ran a jumper from that plug under the cover.. i replaced the whole assembly.. Thanis for your help..
  • Posted 16 Sep 2016 06:02
  • Reply by irrk1
  • Massachusetts, United States
Post a Reply Report this post
Are you measuring voltage at the plug (CA834)? I'll do some reading to see and get back to you.
  • Posted 24 Aug 2016 14:21
  • Reply by Dfraz916
  • California, United States
Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Showcased in the Virtual Expo

From the forum discussions …
"E300Aj JLG Lift - Verify all limit switches..extension usually the one faulty or not making contact. Thanks Matthew_Reed NY"
Matthew_Reed, United States
Read & Post in our Forums
Fact of the week
The Michelin Guide with its star rating system originated in France in 1900. The guide was created as a marketing tool to encourage more car travel and consequently increase the demand for tyres. It initially contained maps, tire repair instructions, and lists of restaurants, hotels, and mechanics.
From the forum discussions …
"Crown dead batteries -...that should get the voltage high enough for the on-board charger to start.... all depends on how low the voltage is and..."
DyslexicNerd_01, United States
Read & Post in our Forums

PREMIUM business

RAEDER-VOGEL
Innovative high-quality wheels and castors for the forklift industry.
RAEDER-VOGEL
Movers & Shakers
Manojit Acharya Manojit Acharya
Manojit Acharya
APAC vice president, Jungheinrich
David Campbell
Senior VP direct sales and marketing, Daifuku Intralogistics America
Maxs Foo
Regional sales manager for Malaysia and Singapore, Libiao Robotics
Luis Miguel Sevilla Martinez
Area sales manager - Spain, Trex Parts
Your Focus
Paul Quickenden
Making ammonia-run engines zero CO2
Paul Quickenden
Read blog
Latest job alerts …
Resident Service Technician
St. Louis, MO, United States
CRM Integration and Salesforce Specialist
Johnston, IA, United States
Forklift Mechanic
Jefferson, WI, United States
View more jobs alerts
Movers & Shakers
Manojit Acharya Manojit Acharya
Manojit Acharya
APAC vice president, Jungheinrich
David Campbell
Senior VP direct sales and marketing, Daifuku Intralogistics America
Maxs Foo
Regional sales manager for Malaysia and Singapore, Libiao Robotics
Luis Miguel Sevilla Martinez
Area sales manager - Spain, Trex Parts