Any pro 5 hints and tips,trust me there are a few.. Discussion about troubleshooting Doosan

Any pro 5 hints and tips,trust me there are a few.

alan_m
United Kingdom

Posted 11 Jul 2008 07:41 AM

From inching cables to hydraulics [url removed] know this range has been released in Europe before th [url removed],so if you have any hints why not post here.

Reply Report

Post reply

Showing items 1 - 4 of 4 results.

Sort messages by:

julesrobdog
Western Australia, Australia

Posted 13 May 2009 12:34 AM

Hi alan m. I work on Pro 5's in australia. We have a problem with auto shifts droppping into neutral (no dash light illumination.) An erratic sounding reverse alarm seems to acompany the problem. have you experienced this...

Reply Report

jeremy_e
North Carolina, United States

Posted 24 Oct 2012 11:28 AM

broken wires in the the seat switch harness under the seat can cause this and is a common issue. you really need to remove harness and ohm to get a good reading on it

Reply Report

EasiTek
Ontario, Canada

Posted 13 Nov 2012 07:57 AM

If you remove the seat, CHANGE the harness for sure. It sometimes ohms out ok but is bad. I drill a hole behind the seat so the harness does not pinch as much. Those seat harnesses were bad right from the factory.

Reply Report

julls24
united kingdom, United Kingdom

Posted 8 Oct 2013 06:37 AM

Hi I have a pro 5 and it idles fast and not tick over any ideas how to fix ?

Reply Report

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.