oil pressure switch? ?? - Technical Troubleshooting discussion in Forkliftaction's forums

Hyster H80XM:
oil pressure switch? ??

2005 with a 4.3 vortec on propane. Rebuilt top end now I have no spark. I have rechecked timing chain cam sensor crank sensor etc. Somebody told me there is an oil pressure safety switch apart from the stock 4.3 one by the distributor. Any truth to this? All help appreciated. Cheers

Posted 30 Dec 2015 10:19
Discussion started by wally_v
British Columbia, Canada

It's your oil... it needs a new motor.

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

i have come across this a couple of times on the XM. There is a second oil pressure switch on the left hand side of the engine Near the back of the unit. It's a bit of a sod to get to as the hydraulic control valve gets in the way a bit. Make sure the wires plugged into it as I have had come across them disconnected a couple of times. I t won't spark if it's not working or connected

Posted 1 Jan 2016 20:44
Reply by lifter01
West Yorkshire, United Kingdom

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.