this problem started 5 weeks ago and is gradually getting worse. after start up , release parkbrake ,select drive then press pedal you only get slight creep in either direction. on /off cycle clears fault for a couple of days !!!. no fault codes on screen though, could this be brakeswitchs starting to playup
Showing items 1 - 3 of 3 results.
hook up lap top , cant think of what program to go to , but wheels should start turning at 460 mille amps. program is in pathfinder
herald my friend. you confirmed my suspicions. laptop would save a lot of time. if i can,t test it out with my meter i,ll recommend to customer to get linde into the truck. won,t waste my time and their money. regards
Hi kevin some fault codes don,t show up on the display but only in the truck memory accesed by the lap top,which you don't have,i have had this before but not intermittant and yes it was the brake switches,if you can get it to do it look on the display and see if the parking symbol stays on when the brake is released this would suggest a badly adjusted or faulty switch.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.