please hep for this issue ,
The machine will start normally in the morning
can work the whole day
If you switch it off and tried to start it immediately
it wont start till after some time (cool off) + - 2 hours
If you tried more cranking a Fault - 1684 will appear
by returning the Key to OFF position then ON again the Fault will disappear
Showing items 1 - 4 of 4 results.
What application is this truck? does it get very hot, you could have a problem with your intake valves, they typically are not hardened
when the pressure of the injection pomp to the injectors is not high enough there is wear problem in the high pressure side
there is a easy test to make sure
cool down the pomp with cold water
first check the fuel valve below 8 volt it dont open in starting
Dear Brewski,
I've checked the injector pump and the nozzols are spraying fine and all the fuel system is good , the lift is not starting if it's hot. Will start after it will cool down.
Thanks for your reply.
The code 168-4 is low battery voltage. ?That would be normal if you are cranking for long periods of time. Have you checked for spark and fuel delivery.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.