Hyster H80C:
lifting problem

hello have a 1977 H80 with a perkins engine. tilt seems fine but will not lift any weight. forks go up very quickly when empty but put on a few ton and no lift. can jerk hoist lever and cylinder will go up tiny bit with each jerk of lever. also forks come down very slowly when lowering. what can I test?
  • Posted 27 Oct 2014 12:30
  • Discussion started by Johnnyb
  • Ontario, Canada
Showing items 1 - 2 of 2 results.
Thanks so much Swoop. Will do these when I get back from golf. Heading for Santee tomorrow for 3 days and then to Myrtle Beach for 10. Will wave if I see you!!!
Thanks again.
  • Posted 28 Oct 2014 04:23
  • Reply by Johnnyb
  • Ontario, Canada
check the relief valve in the main control valve.
might have a broken spring in it.

next would be the safety valve at the cylinders and lastly check the cylinder packing.

pressure is bypassing somewhere
  • Posted 27 Oct 2014 23:45
  • Reply by swoop223
  • North Carolina, United States
You've been swooped!
swoop223@gmail.com

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Global Industry News
edition #1228 - 1 May 2025
There is simply no ignoring the push for a greener, more sustainable materials handling equipment industry as manufacturers and customers alike seek eco-friendly solutions to reduce or eliminate carbon emissions... Continue reading
Upcoming industry events …
May 09-11, 2025 - Bangalore, India
October 21-23, 2025 - Panama City, Panama
July 15-17, 2025 - Hong Kong, Hong Kong
Fact of the week
On average, people read 10-30% slower from a screen than from paper.
Latest job alerts …
Dubuque, IA, United States
Louisville, KY, United States
Louisville, KY, United States