1. Home
2. Forums
3. Design & Engineering

Discussion:
Bt C4E200 service manual

Hi,

I am looking for help with a BT C4E200 or possible fault code description and schematics.
Fault codes 08 & 68

Any help is greatly appreciated

• Posted 11 Sep 2014 05:12
• Modified 11 Sep 2014 17:57 by poster
• Discussion started by Smithers
• Yorkshire, United Kingdom

Regards lee smith

Post a ReplyReport this post

Hi Frits,
Am looking for help with error code 2A.
Regards.

• Posted 22 Mar 2020 22:17
• Reply by Eric_Mwas
• Kenya

Post a Reply Report this post

Thank you Frits I will try.

• Posted 15 Sep 2014 18:52
• Reply by Smithers
• Yorkshire, United Kingdom

Post a Reply Report this post

From the manual:
08 K1 contactor failure. The contactor is supplied bot the contacts not close. Check the coil (100 ohm) and the relevant cables. Check the contacts.

68 same as 08; 08 is from master traction module. 68 is from slave traction module. So same fault detected by 2 different modules.

You might have a stuck or corroded main contactor

• Posted 12 Sep 2014 17:59
• Reply by frits_f
• utrechte, Netherlands

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.