Hi , I am having a problem in bt
Toyota Model no. POW1200HSE ,
Error code 1 on the logic box
display , If it is posibl to get.
trouble shooting manual. Thanking
you...
Showing items 1 - 15 of 22 results.
Good, Can you send me your Mob No.. Please.. on my mail id..
Thanks for the information sir , there is a fault of control v blockage
and now my OPW is running well thanks....
This is The Part same as Reach Truck, What you have.. Model BT RRB Series reach truck part.
Dear sir , is there any way to by pass that magnetic switch
Change the Magnet switch- 214259-050, of below the mast..Ur problem will get solve..
I am having problem is that my op lift is very slow when coming down it is just above 0.
Thanks for information.......
They are both part number 200319.
The -002 & -006 are just the software release versions, -006 is just a newer software release of -002.
BT PART 200319-002 Part no. of OPW1200HSE , BT PART 200319-006 Part no. of OPW1000HSE
If the part number on the sticker is the same then YES.
Sir,
If I want to interchange logic box A2 card from OPW1000HSE With OPW1200HSE Can it posibl to do.
I am also intrested to know about the emergency mode. how can we do this ?
Steering working is a good sign as that means you have a traction fault.
Brake is only on the back wheel, either manually release the brake then you can push / steer the truck out the way.
OR pick the back end of the truck up so the drive wheel is just clear of the floor & tow it out the way.
only steering is working...
I did'nt know about emergency mode , Is there any way to move the truck
So the truck wont drive at all after starting it up?
What functions are working on the truck?
Is the steering working?
Does the brake release when you go for traction?
Can you get the truck to go in to emergency mode with the joystick dance?
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.