1. Home
  2. Forums
  3. Technical Troubleshooting

Raymond EASIOPC30TT:
code 45

help!! I'm having a CODE45 after replace the lift contactors, all cables are where must be, I trouble shoot according to the book , everything is good, but the code still there. Any ideas??
  • Posted 7 Jan 2014 05:45
  • Discussion started by max1248
  • Florida, United States
Post a ReplyReport this post
Showing items 1 - 2 of 2 results.
thanks for your response, i found out my mistake, i have the P1wire connected on the grong place. thanks
  • Posted 7 Jan 2014 12:08
  • Reply by max1248
  • Florida, United States
Post a Reply Report this post
does the contactor physically close? if not the coil driver card could be bad. was the contactor replaced for the same code?
are your fuses good? there is a small control wire that goes on the contactor tip, is it installed?
  • Posted 7 Jan 2014 09:04
  • Reply by stam
  • Ontario, Canada
Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Ncn 85TH
Ncn 85TH 2017
Balling, Denmark
Used - Sale
Toyota 8FGCU25
Toyota 8FGCU25 2019
Flesherton, Ontario, Canada
Used - Sale
|
Upcoming industry events …
LOGMAT
May 09-11, 2025 - Bangalore, India
TOC Americas 2025
October 21-23, 2025 - Panama City, Panama
The Battery Show Asia
July 15-17, 2025 - Hong Kong, Hong Kong
More Events
Global Industry News
edition #1228 - 1 May 2025
There is simply no ignoring the push for a greener, more sustainable materials handling equipment industry as manufacturers and customers alike seek eco-friendly solutions to reduce or eliminate carbon emissions... Continue reading
Movers & Shakers
Linda Häkkilä Linda Häkkilä
Linda Häkkilä
vice president, Investor Relations, Konecranes
Rhiannon Stone
vice president operations, Elokon Group
Bennit Schmieder
President, EP Equipment Europe
Mathias Höglund
Senior vice president human resources, Kalmar
Global Industry News
edition #1228 - 1 May 2025
There is simply no ignoring the push for a greener, more sustainable materials handling equipment industry as manufacturers and customers alike seek eco-friendly solutions to reduce or eliminate carbon emissions... Continue reading
Terberg YT220
Terberg YT220 2004
Balling, Denmark
Used - Sale
Crown RD572513TT6860R
Crown RD572513TT6860R
Braeside, Melbourne, Victoria, Australia
Hire
|

Showcased in the Virtual Expo

Movers & Shakers
Linda Häkkilä Linda Häkkilä
Linda Häkkilä
vice president, Investor Relations, Konecranes
Rhiannon Stone
vice president operations, Elokon Group
Bennit Schmieder
President, EP Equipment Europe
Mathias Höglund
Senior vice president human resources, Kalmar
Your Focus
Stuart Taylor
The critical role of managers in MH safety
Stuart Taylor
Read blog
From the forum discussions …
"Remove the coils and ohm out the pins. Coils take a different number than regular 4y plugs... If code is there then it is an ecu issue."
ron_k, United States
Read & Post in our Forums
Machinery-onQ
Machinery-onQ.com is the one place to source and sell all your new and used machinery.
Find equipment for sale | Add a listing
VISIT
machinery-onQ.com
Machinery-onQ