Showing items 1 - 5 of 5 results.
Think I'm stuck on this 1 iv'e got voltage when not connected but none when connected.
If you've put voltage to it and it works then it's not shorted or open.....a regular ohm reading for one is around 70-120 ohms I believe
Hi Kevin how may ohm should a good 1 read?? I put direct voltage to the solenoid and the valve moves. many thanks
Did you ohm the solenoid Coil on the lock off to see if it was shorted????
Did you ohm the solenoid on the lock off to see if it was shorted????
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.