I have a c500 ys200 converted to a squeeze front end used for moving blocks of hay, the lift ram is leaking out of the bottom, I already bought a seal kit from my local gray lift. My problem is to get the ram out i have to lift the forks all the way up till i clear the top of the ram, then i have to somehow hold the inside track and the forks up while i remove top c clip, lower the ram, then remove it from underneath. How do I keep the forks and inside track up in the air, has any body done this before? Thanks for any input or ideas
Showing items 1 - 4 of 4 results.
You know you can disconnect the primary lift chains and lift in inner rail off the carriage, right?
Yeah thats what i was thinking of just using chain to hold it up, Heres the serial numbers:
CLARKLIFT
C500-YS200D
Y1625-30-3665 277
7612122 BRODI SIDESHIFT
WSS16650 24 210 24
Yeah i'll get them for you tomorrow, thanks for the reply
Hi,adam f. Do you have a serial#? Also,do you have the mast #?
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.