1. Home
2. Forums
3. Technical Troubleshooting
4. Komatsu
5. FD 150-7

Komatsu FD 150-7:
Slow in engaging Forward or Reverse

we have a komatsu fd 150 1996 model...
its runs very slow in forward and reverse...
we have cleaning the oil line and change oil the transmission...
but it still slow..
its newly overhauled engine (izusu 6bg1)

• Posted 31 Jul 2014 10:28
• Reply by inz_007
• cebu, Philippines

Post a Reply Report this post

after checking the 'spools' on the control valve you may want to try servicing the transmission.
change the fluid and clean out the sump screen at the base of the housing where the return supply line hooks to.

if it has not been serviced in a while it could be clogged up not letting enough fluid through which would cause the delay in the clutch packs engaging.

this is a common occurance in all lifts that don't get the transmission serviced properly.

• Posted 29 Jun 2014 23:24
• Modified 29 Jun 2014 23:25 by poster
• Reply by swoop223
• North Carolina, United States

You've been swooped!
swoop223@gmail.com

Post a Reply Report this post

Maybe just check the control valve on top of the transmission to see if spills are sticking inside

• Posted 29 Jun 2014 15:10
• Reply by clinton_b
• Queensland, Australia

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.