Showing items 1 - 14 of 14 results.
Message for Tom_p I didn't receive your email with the info regarding the controller mismatch fault resulting in the truck (when steering) acting as if the differential has jammed. thanks again in anticipation. Sandy.
I also keep getting this error code " 236 mismatch " , would any one give a solution for this fault.
My controller is zapi FZ5035 fitted on Clark EPX20S
Thanks
check your email for some more info.
You can use the Zapi to confirm all your switches are closing in the tests menu. Using the old Zapi hand set is clunky but does work.
That said,recently the same symptoms and fault code you describe were found to be corroded and broken seat enable wiring under the battery.
Hi Tom P
Can you still provide the fault finding info for the Clark TMX 15 with Zapi Dual AC controllers This is a 4 wheel forklift with two drive motors.
Hi Tom_p
Didn't get your the email about the info to try and resolve our mismatch controller fault. When trying to steer the truck it acts as if it has differential lock.Thanks in anticipation. Sandy
236 fault is a Input mismatch between slave and master controller.
Check, directional, brake , seat, accelerator switch and wiring. Had same fault and the problem was enable wiring corroded under under battery.
Did anybody get to the bottom of the code 236 with mismatch on dash?
The new ZAPI controller fixed "my" 236 problem.
Operators are running the batteries down REALLY LOW constantly !!
The cables that run to the motors from the boxes are all overheated, crispy, and terminals on ZAPI boxes are melted... high amperage ?? I'm assuming.
Hi guys
i have the same problem (error code 236) on TMX 15 CLARK truck
have you found the solution ???
Thanks
Nope!!!
Talked to a guy at Clark factory.... he says its gotta be controller... So tomorrow she gets a brand new controller - not another freaking Flight Systems rebuild!!
It's an expensive roll of the dice !!
Have you resolved your 235 and 236 fault yet? If not, i do have some trouble shooting info.
error code 236 and 235. please send me the details.
equiptecworld at gmail dot com
my email is in my profile
you should put your email address in your profile
How do I send you a private message ??
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.