1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. Code 125

Discussion:
Code 125

Event code 125 is coming up when lowering the forks from 2nd stage to first stage. Everything disables. Need help! Thanks
  • Posted 30 Jan 2017 04:57
  • By jonathan_s
  • joined 6 Dec'16 - 21 messages
  • Illinois, United States
Post a ReplyReport this post
Showing items 1 - 5 of 5 results.
Shoot me a direct email next time instead of posting here....rkeilback@yahoo dot com
  • Posted 31 Jan 2017 09:22
  • Modified 31 Jan 2017 10:59 by administrator
  • By Ifixit
  • joined 30 Jan'17 - 174 messages
  • Pennsylvania, United States
Post a ReplyReport this post
I've seen crazy and off the wall things during my 23yrs with Crown...glad to be of any help. Sometimes it's just a single component in those access panels to make you pull your hair out troubleshooting
  • Posted 31 Jan 2017 09:18
  • By Ifixit
  • joined 30 Jan'17 - 174 messages
  • Pennsylvania, United States
Post a ReplyReport this post
Thanks for the help. I did all the troubleshooting and found no issues. So for the **** of it i replaced access one and it eliminated the problem. What are the main reasons modules end up going out?
  • Posted 31 Jan 2017 08:36
  • By jonathan_s
  • joined 6 Dec'16 - 21 messages
  • Illinois, United States
Post a ReplyReport this post
After reviewing the code, seems that it could be either the distribution board or Access1. With key off, check TP7 to TP8....resistance should be 60 ohms. If zero, wire is shorted. Then unplug CA204 and CA205, if more than 120 ohms...replace distribution board. If it is 120 ohms, replace Access1
  • Posted 30 Jan 2017 10:16
  • By Ifixit
  • joined 30 Jan'17 - 174 messages
  • Pennsylvania, United States
Post a ReplyReport this post
Please provide complete model and serial number
  • Posted 30 Jan 2017 09:35
  • By Ifixit
  • joined 30 Jan'17 - 174 messages
  • Pennsylvania, United States
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Manitou MH25-4
Manitou MH25-4
Braeside, Melbourne, Victoria, Australia
Hire
Mitsubishi FD200
Mitsubishi FD200 1992
Yokohama, Japan
Used - Sale
|
Forklift Diaries
Last Week's Most Read
edition #1236 - 26 June 2025
Movers & Shakers
Jeannette Walker Jeannette Walker
Jeannette Walker
CEO, MHEDA
Stéphane Hénon
President, European Rental Association (ERA)
Tejal Ranjan
Chief marketing officer, JLT Mobile Computers
Pete Stanislawczyk
Chief executive officer, East Penn Manufacturing
Last Week's Most Read
edition #1236 - 26 June 2025
Advance CS7000
Advance CS7000 2016
Illinois, United States
Used - Sale & Hire
USD8,000
Hangcha CPYD25XH21F-JC
Hangcha CPYD25XH21F-JC
Flesherton, Ontario, Canada
New - Sale
|
Your Focus
Stuart Taylor
Reduce the risk by tackling the cause
Stuart Taylor
Read blog
Upcoming in the editorial calendar
WIRELESS CHARGING
Aug 2025
MANAGING MIXED FLEETS
Oct 2025
Ask us about editorial contribution

PREMIUM business

Flexi® By Narrow Aisle Limited
Leading manufacturers of very narrow aisle (VNA) equipment.
Flexi® By Narrow Aisle Limited
Last Week's Most Read
edition #1236 - 26 June 2025
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".