showing error code f0-2 on 7fbcu25 - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
showing error code f0-2 on 7fbcu25

Toyota 7FBCU25

can someone tell me what this code is? thanks so much.

Posted 4 Jun 2014 02:54
By paul10
joined 18 May'12 - 15 messages
Ontario, Canada

Showing items 1 - 3 of 3 results.

Sort messages by:

So if everything works as needed then we need to check voltage. Connect battery with key on. At connector CN 103 on the CPU Board from CN 103-12 to CN 103-13. Readings of 0 V (OK) possible Harness or CPU Board. Reading of 5 V (NG) PBEHPS (Printed Board EHPS)

Posted 25 Jun 2014 10:39
By Bulldog965
joined 15 Oct'09 - 63 messages
Indiana, United States

Post a Reply Report this post

Yeah the truck runs fine

Posted 25 Jun 2014 08:53
By paul10
joined 18 May'12 - 15 messages
Ontario, Canada

Post a Reply Report this post

The EHPS (Electronic power steering circuit) sees power going through the motor even though the EHPS is not on. Two questions: Does the power steering motor run with truck plugged in? Does it run when turning the steering wheel?

Posted 24 Jun 2014 11:59
By Bulldog965
joined 15 Oct'09 - 63 messages
Indiana, United States

Richard

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.