1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. Broken roller in mast

Discussion:
Broken roller in mast

Any suggestions how to remove a broken roller in the mast? It wedges in and pulls up the next rail out of sequence. It pulled the wire and hoses apart.
  • Posted 10 Jan 2014 23:32
  • By jim_v
  • joined 26 Aug'08 - 61 messages
  • Michigan, United States
Post a ReplyReport this post
Showing items 1 - 1 of 1 results.
Ouch, Yes these are tricky. First think SAFETY. magnets or thin shims to pull/lift out. Watch your fingers and hands BE SAFE
  • Posted 11 Jan 2014 00:37
  • By Prentice
  • joined 25 Jun'08 - 600 messages
  • Ontario, Canada
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Fact of the week
In March 2002, identical twins in Finland died on the same day in similar accidents within hours of each other. A 70-year-old man was killed by a truck while cycling; hours later, his twin brother was killed by a truck on the same road, about a mile away, before the family had been informed of the first accident.
Global Industry News
edition #1256 - 13 November 2025
Automation is a key theme in the stories we have in this week’s Forkliftaction News ... Continue reading
SMV (Konecranes) 33-1200C
SMV (Konecranes) 33-1200C 2023
Balling, Denmark
Used - Sale
Terberg RT223
Terberg RT223 2012
Balling, Denmark
Used - Sale
|
Upcoming industry events …
LogiSYM Platinum Indonesia 2025
November 27, 2025 - Jakarta, Indonesia
Caspian Ports and Logistics 2025
December 9-11, 2025 - Aktau, Kazakhstan
Automate 2026
June 22-25, 2026 - Chicago, Illinois, United States
More Events
Machinery-onQ
Machinery-onQ.com is the one place to source and sell all your new and used machinery.
Find equipment for sale | Add a listing
VISIT
machinery-onQ.com
Machinery-onQ
Your Focus
Diana Davoyan
Manual or automated material handling: finding the right balance
Diana Davoyan
Read blog
Read more Your Focus blog articles
From the forum discussions …
"ForklifttSteve from Mississippi seeks advice on resealing a leaking valve cover on a Mitsubishi 4G64. Ron K from North Dakota suggests 'Use the loctite flange sealant. It has been the best so far I've used in 30 years.'"
ForklifttSteve, United States
Read & Post in our Forums
Fact of the week
In March 2002, identical twins in Finland died on the same day in similar accidents within hours of each other. A 70-year-old man was killed by a truck while cycling; hours later, his twin brother was killed by a truck on the same road, about a mile away, before the family had been informed of the first accident.