HELP!! I have a Dockstocker DSS350 with an intermittent code 2F and do not have any documentation for this truck. It has been sold and I need to clear this code so I can get the truck to our paint shop ASAP. Any help would be great.
Showing items 1 - 7 of 7 results.
Should read 7 ohms or under in one direction and 0 ohms the other direction. check your e-mail let me know.
Which terminals are the anode, cathode and gate on Q1. What resistance values should I see on Rec 1 and 2 in the conducting direction (I am assuming 7 to 12 ohms) and non-conducting direction ( I am assuming 50,000 ohms or higher ). Thanks
If your Q1 , REC1 , REC2 and the wiring check good then your Regen heat sink needs replaced. If you order a Q1 from a Raymond dealer you get a kit with instructions for install, there has been an update.
If your Q1 , REC1 , REC2 and the wiring check good then your Regen heat sink needs replaced. If you order a Q1 from a Raymond dealer you get a kit with instructions for install, there has been an update.
Willd, Is there some place I should start looking for the problem? I do not have a shop manual for this truck so I am poking around in the dark. The code pops up when plugging.
The 2f codes is a failure in the regen circuit.
Hello everyone !!.I have toyota 8 series 8FDU25-30 and Komatsu FD25T-30T.i need service manual about that.Please send to me.Thank for support!
my email is nguyenvuthanhliem1982@gmail dot com
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.