Discussion:
no fuel after regulator????? PLEASE HELP!

I have a Daewoo model G25E propane fork lift.

it has no fuel coming from the regulator,

I replaced the, "fuel trim valve" I guess controls the vacuum for the regulator, I also replaced the regulator and a solenoid valve that's just before the regulator.


I have fuel going in to the regulator but not out of it! I have replaced everything!

anyone have any ideas? i'm not a forklift mechanic, my boss wanted me to work on and figure out the issue. this problem is a little beyond me.... any advice is appreciated!
  • Posted 8 Jun 2013 08:34
  • By warren_p
  • joined 8 Jun'13 - 1 message
  • Maine, United States
Showing items 1 - 2 of 2 results.
GOT SERIAL NUMBER?
I would say Warren may be in a situation where his employer is trying to see if Warren is wise enough to admit to "knowing what he does not know".
The differences between fuel systems can not be covered safely in only a few pages, much less in the space an internet forum/conversation provides. this being an emission controlled truck, the US [and possible state] government[s] have some rules about training that cover who has been certified to repair these units (those C.A.R.B. rules, imnsho, are the excuses dealers/manufacturers are using with an abundance of caution to keep diagnostic and password reset software proprietary/trade secret but I digress).
As it has a 'fuel trim valve' that is replaceable, I assume this is a tier2 truck, as such the 'computer' will not provide fuel or spark under a lot of possible conditions if everything is not within certain pre-set perimeters. you will need to be able to access the error codes, to find out why this truck does not start. does it run if you give it starting fuel?
  • Posted 9 Jun 2013 23:32
  • By edward_t
  • joined 5 Mar'08 - 2,334 messages
  • South Carolina, United States
"it's not rocket surgery"
The hose has to be hooked up to the carb to allow fuel to flow from the regulator. Did you check the carb?
  • Posted 9 Jun 2013 00:44
  • By mrfixit
  • joined 11 Dec'08 - 1,434 messages
  • New York, United States

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Upcoming industry events …
October 6-9, 2025 - Detroit, MI, United States
October 6-9, 2025 - Detroit, MI, United States
November 14, 2025 - Melbourne, Australia
Latest job alerts …
Indianapolis, IN, United States
Columbia, SC, United States
East Syracuse, United States
Saratoga, United States
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".
UN Forklift FD35T-C2JB2
HANGZHOU, Zhejiang, China
New - Sale
Mitsubishi FGE35AT
Yokohama, Japan
Used - Sale

PREMIUM business

VETTER Industrie GmbH
The world's most comprehensive range of forks and the most intelligent sensor fork for more safety and efficiency.
Upcoming in the editorial calendar
WIRELESS CHARGING
Aug 2025
MANAGING MIXED FLEETS
Oct 2025
Upcoming industry events …
October 6-9, 2025 - Detroit, MI, United States
October 6-9, 2025 - Detroit, MI, United States
November 14, 2025 - Melbourne, Australia
Latest job alerts …
Saratoga, United States
Indianapolis, IN, United States
Columbia, SC, United States
East Syracuse, United States
Upcoming in the editorial calendar
WIRELESS CHARGING
Aug 2025
MANAGING MIXED FLEETS
Oct 2025