I need to replace the steer encoder on a Yale OSO30ECN24TE0889 s/n C801N2195Y and the new aftermarket encoder comes with the wrong plug ( 4 conductor straight molex in place of the 4 conductor square ). I need to know what the pin out is for the four wires on the encoder. Red, White, Black & Green to wires numbered 89A, 92A, 33 & 34 in the wire harness. I also need a part number for the resistor/diode set that plug into the wire harness just below the In motion power steering controller. One has a 3 conductor straight molex plug and the other is a 3 conductor. Thanks for the help.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.