I need to replace the steer encoder on a Yale OSO30ECN24TE0889 s/n C801N2195Y and the new aftermarket encoder comes with the wrong plug ( 4 conductor straight molex in place of the 4 conductor square ). I need to know what the pin out is for the four wires on the encoder. Red, White, Black & Green to wires numbered 89A, 92A, 33 & 34 in the wire harness. I also need a part number for the resistor/diode set that plug into the wire harness just below the In motion power steering controller. One has a 3 conductor straight molex plug and the other is a 3 conductor. Thanks for the help.