Ed- one big forklift- orgy fest! You never know who is in bed with who!
the c50 is a Komatsu with different paint and decals.
Hey thanks for replying, any advice helps!! Found that on an Allis Chalmers transmission, you have to take the front end of the transmission off, then has two snap rings on front of convertor you remove after removing fly wheel plate mount. Then you can slide off convertor to access seal. Kinda a pain in you know what!!!
dog- not familiar with your exact machine- does the torque convertor bolt together? I've worked on some older nissans where the converter had to be disassembled to remove it.