Discussion:
Shuts off need help!

I have a H50XM with the 3.0 GM engine. I have the engine shutting off about 30 sec to 1 min before it shuts off and the engine light comes on and flashes 1 flash. It will restart right back up but then shuts off. I have replaced the coolant temperature sensor and jumped out the oil pressure switch. I have removed all of the positive and ground cables and cleaned them. I ran a few grounds just to be on the safe side. I pulled all of the plugs apart to make sure they were clean and no rubbing of any wires I could see. Still the same shutting off after a few seconds. I am lost and need help if anybody could give me advice to we're to go from here would be great. Thanks!
  • Posted 13 Feb 2013 02:57
  • By dieselcrazy
  • joined 3 Feb'12 - 5 messages
  • Pennsylvania, United States
Showing items 1 - 2 of 2 results.
It is lp H177B47943B
  • Posted 13 Feb 2013 04:56
  • By dieselcrazy
  • joined 3 Feb'12 - 5 messages
  • Pennsylvania, United States
serial nr ? gasoline or gas close loop?
  • Posted 13 Feb 2013 04:41
  • By AAPEE
  • joined 28 Aug'12 - 76 messages
  • Brussels, Belgium

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Fact of the week
The word "okay" (or its abbreviation "OK") originated as a humorous misspelling. In the 1830s, a fad in Boston involved using abbreviations of intentionally misspelled phrases. "OK" stood for "oll korrect," a playful mispronunciation of "all correct".
Latest job alerts …
Tampa, United States
Marietta, United States
Tampa/Orlando Florida, United States
Dallas, TX or Lexington, KY, United States
JCB 533-105
Braeside, Melbourne, Victoria, Australia
Hire
UN Forklift FBR25NQC3
HANGZHOU, Zhejiang, China
New - Sale
Movers & Shakers
Steve Dimitrovski Steve Dimitrovski
Director sales for Australia and New Zealand, Swisslog
General Manager, Forkpro Australia
Global CEO, Swisslog
Board member, UKMHA