Jungheinrich EFG 316 display harness - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
Jungheinrich EFG 316 display harness

Hi there

We have a Jungheinrich EFg316 Serial 319071 which is 2005 model.

We need to access the display and change some parameters but with this dash it looks unlikely. I want to plug in another dash I have which has the standard green plug on it, where as this truck has a D pin plug. Can anyone supply a wiring diagram which shows how I can make up a lead to connect from a D pin harness to a standard Green plug connector?

This would be a great help.

Thanks

Posted 24 Jul 2012 00:33
By elektrodrive
joined 2 May'08 - 746 messages
West Midlands, United Kingdom

enquiries@elektrodrive.co.uk

http://www.facebook.com/pages/Elektrodrive/135894223166624

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

i wouldnt mixmatch dash displays
they are different for a reason which is why they have a different plug on them.
if you try and force wire the old dash in there you could blow out the ecm.
get the judit software and access it via laptop if you want to change settings. Also most of the newer dash displays i've seen do have an access point to enter passcode to access maintenance parameters.

Posted 24 Jul 2012 12:58
By Jplayer
joined 12 Apr'07 - 407 messages
North Carolina, United States

John Player Jr
_________________
LiftOne, LLC
Charlotte, NC
Email: jplayer@liftone.net

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.