Hi
Can anybody help me out with a Boss problem.
Got no drive or hydraulics, and don't think my inline contactor is closing. Got voltage at contactor but doesn't want to play.
Seat switch good, fuses good, battery good.
Thanks
PS Might be a stienbock in disguise!!!!!
Showing items 1 - 3 of 3 results.
Thanks for the reply kev,
Tried cleaning the contacters etc and checking some other wiring yesterday but still nothing. Removed circuit board and couldn't see anything there either so possibly is knackered.
Regards Jock.
Hi Jock
Had to dig deep in the memory banks for this one!!!
Mine was a Junghienrich in disguise,with the control panel at the rear right hand side looking forward. If yours is the same there are some small red and green leds on the printed circuit board ( you have to use a small flexi mirror cos they are behind it and difficult to see.) They flash up a code wich I don't have info on. Mine had a solid red on the drive which after sending the whole panel away was told it was uneconomical to repair( main transistors US )
Have fun
Regards
Kev
Hi, we have the same problem with our Boss JE10 electric forklift. Any help with this problem would be gratefully received.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.