teach-in zapi - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
teach-in zapi

hii
I had a problem on the unit VNA Dambach, in zapi sem-3 (80 V-500A), there are alarms blink 2 (incorect start) and on display there is no alarm, the console in the menu tester there are still problems at start-up that is already acelerator on the condition of 50%, how to teach-ins on units such Dambach (VACC setings).
thanks, help me

Posted 18 Dec 2011 14:21
By bayu_abadi
joined 18 Dec'11 - 2 messages
jakarta, Indonesia

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

thank you, I will try later

Posted 20 Dec 2011 02:07
Modified 20 Dec 2011 02:08 by poster
By bayu_abadi
joined 18 Dec'11 - 2 messages
jakarta, Indonesia

Post a Reply Report this post

afaik:
for older zapi units it is in the main menu: 1. program, 2. tester... 6.? program vacc.

for newer zapi units: press both arrow up keys at the same time, then you find a second menu where you can teach in the vacc.

succes.

Posted 19 Dec 2011 04:24
By frits_f
joined 19 Dec'09 - 318 messages
utrechte, Netherlands

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.