We have two Taylor Dunn SC1-59 Tuggs that we purchased from a wholesaler. These units have very low speed and very little power. These are 24 volt units. We have a customer unit that is set up the same, but has much more power and speed. We tried swapping out the motor and the controllers but had no improvement. The batteries test out good. Does anybody have any experience with these units.
Thanks,
Showing items 1 - 4 of 4 results.
That is good, I am glad I was able to help.
Hi Jeremy,
The accelerator box fixed it! Thanks for the help,
Hi Jeremy,
We have not tried that. We are only getting 10 volts out of it. I think we should be getting 11.5. Thanks for the heads up. Have you had to replace this box on units in the past? Thanks for your help, Tim
have you tried swapping the accelerator box?
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.