Lift had a bad traction motor that would short out and in turn short the entire lift itself. It was replaced and now there is no power to either motor or brake switches on the motor/brake assembly. I'm getting good continuity through out the wire from the brake switch to the traction card and from the traction card to the drive handle. All switches from brake assemblies to deadman and sls are good. Contactors get voltage but not to the power supply that connects to the motor and do not operate when on deadman and attempted to drive. I greatly appreciate any and all help!
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.