Discussion:
Hands control problem??

Hi guys!

So I have this problem with a wave60 that happened since few weeks now out of nowhere. Sometimes when I drive the wave and stop to take a box for example, the monent I put my hands on the handles and want to move again the wave just stop there with the hands light icon and message « center control » or « hands control » something like that. I have to mess with the handles, go back and forth, remove hands and put back hands to finally make it start again. Also sometimes I'm not even on the wave but its powered on and it start to beep « center control » i'm like « wtf is there a ghost that wanna run it » haha :)

What could be the problem and how to fix this? Sometimes its when I'm raising the lift to put a box on a shelf and when I want to lower back the lift BOOM! Its acting like crazy, beeping center control and can't move/lower until I have messed up with the handles.

Sometimes every few minutes the wave stop right here and stuck with again hands/center control problem.

Thanks in advance!
  • Posted 24 Jul 2024 05:14
  • By Djaztek
  • joined 23 Jan'24 - 84 messages
  • Quebec, Canada
Showing items 1 - 2 of 2 results.
I checked the calibration menu but don't really understand how this works. I mean.. when I'm in the calibration menu for the handle what I'm supposed to do exactly? Just move the handle slowly forward?
  • Posted 26 Jul 2024 05:14
  • By Djaztek
  • joined 23 Jan'24 - 84 messages
  • Quebec, Canada
You can recalibrate the handle in the service menu otherwise the pot in the handle could be bad needing replacing.
  • Posted 26 Jul 2024 03:36
  • By DyslexicNerd_01
  • joined 13 Jun'23 - 217 messages
  • Wisconsin, United States

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Global Industry News
edition #1236 - 26 June 2025
As June comes to a close, the month when our sector recognises National Forklift Safety Day , the United Kingdom’s Association of Industrial Truck Trainers (AITT) has issued a timely reminder of the need to ensure any staff training is fully accredited... Continue reading
SMV (Konecranes) 4531CC5
Balling, Denmark
Used - Sale
Toyota 4FD240
Yokohama, Japan
Used - Sale
Hangcha CPYD32XW71F-C
Flesherton, Ontario, Canada
New - Sale
Unicarriers FD80-2
Yokohama, Japan
Used - Sale
Global Industry News
edition #1236 - 26 June 2025
As June comes to a close, the month when our sector recognises National Forklift Safety Day , the United Kingdom’s Association of Industrial Truck Trainers (AITT) has issued a timely reminder of the need to ensure any staff training is fully accredited... Continue reading