I am only getting about 60% of max speed in both directions.
Accelerator Pot reads 3 volts in neutral, and 0 volts at full throttle regardless of direction.
The tach reads 49 to 45 volts in one direction and -45 to -49 volts in the other.
Batteries are fully charged and brushes are good.
LED indicator on the Sevcon controller remains on steady, indicating the controller does not see any faults.
Disconnecting or reversing the wires on the tach gives a fault 10 for a tach error.
Can anyone verify the readings i am getting as good or bad? Any suggestions on the next step?
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.