Excessive fuel through system - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
Excessive fuel through system

Clark C500 SERIES

Clark c500-s30 getting excessive fuel at carburetor. Believe it's vaporizer but need confirmation

Posted 19 Sep 2022 10:02
By William_Few
joined 19 Sep'22 - 3 messages
Kentucky, United States

William Few

Post a Reply Report this post

Showing items 1 - 4 of 4 results.

Sort messages by:

If i remember it is 5 to 7 psi at the water jacket vaporizer

Posted 23 Sep 2022 02:26
By stillworkin
joined 2 Nov'18 - 96 messages
New York, United States

Post a Reply Report this post

Thanks everybody for info. It was the vaporizer

Posted 20 Sep 2022 12:02
By William_Few
joined 19 Sep'22 - 3 messages
Kentucky, United States

William Few

Post a Reply Report this post

Does the vaporizer go into the top water housing where the top hose goes if so it is a zenith vaporizer there is a allen screw at the top that is were you check the gas pressure it is around 8to 12psi any more and the vaporizer is bad also the carb could cause to blow gas through must check at vaporizer first hope this helps.

Posted 20 Sep 2022 11:59
By Scott_
joined 16 May'21 - 312 messages
Pennsylvania, United States

Scott

Post a Reply Report this post

A specific vaporizer that goes on. must make 20 psi for it to run correctly. Waukesha engines only.

Posted 20 Sep 2022 05:17
By grant_c
joined 12 Aug'16 - 27 messages
Manitoba, Canada

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.