C2.2 lower valve calibrate - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
C2.2 lower valve calibrate

Crown RC5530-35

Lift will not lower when doing calibration on lower valve. I go to max height and lower when commanded too,but forks never lower.

Posted 1 Sep 2021 10:49
By werthy1
joined 27 Feb'16 - 26 messages
Ohio, United States

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

thanks that did the trick.

Posted 3 Sep 2021 08:53
By werthy1
joined 27 Feb'16 - 26 messages
Ohio, United States

Post a Reply Report this post

Don't go to full height. Go to a few inches or so before max height and then it will lower. This is a known issue. It will calibrate fine a few inches below.

Posted 1 Sep 2021 13:46
By 1CrownTech
joined 23 Jul'21 - 117 messages
Washington, United States

1crowntechnician@gmail.com

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.