I have checked contactor, steering motor and
Continuity through the harness from side steering motor to logic unit. All good. Even thought maybe the logic unit was corrupt replaced with a spare to see if the results changed. I will sit fine even move forward/reverse. As soon as I activate the raise forks 2-3 seconds later I get a code 49 and all functions stop. I've disconnected the steering pump from the motor to see what changes. Still faults. Any suggestions
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.