OM CARRELLI XE15 3AC WON'T MOVE - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
OM CARRELLI XE15 3AC WON'T MOVE

OM Pimespo XE15 3AC

Dear,

We have in our factory one OM CARRELLI forklift

Model: XE15 3AC

Serie Number: F14032W00532
Year of manufacture 2008.

Alarm: 182
When the ignition is switched on, the pump starts and immediately the message ALARM 182 appears.

The ascent and descent of the mast is not a problem.

But the forklift does not move forward or backward either.

Ca n someone explan us the problem and help us to resolve the problem.

Best regards.

Posted 22 Jan 2018 20:44
By BAM3903
joined 5 May'14 - 9 messages
14 PROVINCE DE nOUADHIBOU, Mauritania

work, work and work again

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

Hello
We have also one OM Carrelli XE15
We have 252 fault code ( TO ACTIVATE HYDRAULICS) , any ideea what we have to fix/repair?

Thank you

Posted 29 Aug 2018 15:38
By Alex1978
joined 29 Aug'18 - 1 message
Romania

Post a Reply Report this post

CODE:
ALARM 182

ALARM:
MOT. TH SENS. LEFT. KO

PROBABLE CAUSES:
The temperature sensor of the left motor is faulty.

CORRECTIVE ACTION:
Chceck that the PTC sensor is not short circuited and that the is a resistanse of about 600 Ohms at its ends. Check the wiring.

Posted 3 May 2018 18:12
By tomason2
joined 5 Apr'15 - 53 messages
Poland

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.