1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. no convertor pressure

Discussion:
no convertor pressure

I took three gauge readings (A) (B) and (C ), had no pressure on C. Not at idle, or 2000 rpm. but had some pressures at A and B.lift moves slow forward and backward. Can you help?
  • Posted 14 Oct 2017 04:41
  • By 1968496
  • joined 28 Sep'17 - 9 messages
  • Michigan, United States
Post a ReplyReport this post
Showing items 1 - 2 of 2 results.
yes I did and the wheels turn in both directions, but on the ground it is slow both ways. doI need to pull the trans?
  • Posted 18 Oct 2017 02:10
  • By 1968496
  • joined 28 Sep'17 - 9 messages
  • Michigan, United States
On the job
Post a ReplyReport this post
morning, did you have the front wheels off the ground?

i will come back to you just now.
  • Posted 17 Oct 2017 15:45
  • By Africa
  • joined 11 Oct'17 - 11 messages
  • Eastern Cape, South Africa
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Fact of the week
Portugal was the first country to implement a nationwide, automatic electronic toll collection system. This system allows vehicles to pass through toll booths without stopping, significantly improving traffic flow on highways.