Engine dies after a few seconds on throttle - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
Engine dies after a few seconds on throttle

Yale GP080VX

I've got a GP080VVXNGGE090, w ser. G813V01837F. The machine will start and idle for about 1 minute but as soon as you hit the throttle it will rev for about 3-5 seconds and then die. There are no codes on the dashboard but the check engine light is ON. It's as if something is shutting off the propane at the injectors, if I hold the throttle open a small amount and spray carb cleaner around the throttle blade it will stay running. Anyone ever run into a problem like this?

Posted 15 Jun 2021 02:17
Modified 15 Jun 2021 02:18 by poster
By bruce864
joined 1 Mar'16 - 40 messages
Texas, United States

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

I would check the oil pressure reading through the sensor. If it stars to fail, the engine will shut off to protect from damage. Also, check the regulator as it has filters internal to the connections. Should they become clogged, will only run for a short period. There is also a drain on the regulator, remove to see how much tar is inside. May need to replace regulator.

Posted 29 Jun 2021 02:17
By Fishmech
joined 12 Jul'17 - 370 messages
Virginia, United States

The hard to do we do right away. The impossible just takes a little longer.

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.