Hi,
Can someone help me with the procedure of restore the default password for "AUTHORIZED SERVICE" menu. I know that the default password is 0002468, but someone unauthorized has changed it.
Thank you!
Showing items 21 - 36 of 36 results.
Instead of I5 try I7, that will do the trick.
Hi you mention that some one had change the atlet service password, if you dont have that you might have replace the atc control, because you need the password for get into the atlet sevice to get into total reset then you can change any thing you want!
ATLET X160
SN: XJN226886/03
YEAR 2019
whats the model and serial?
After failed attempt and many other tries, i resume with same problem not solved.
I wonder that i remove the chip - battery (the 3V one) from somewhere, will work?
This equipament should not have many options and settings.
I think that the previous procedure with " I + 5 " would work at biggest truck's like "U" series witch have another keyboard controller (bigger and with more options).
Other options please?
Many advance regards!
Thanks a lot!
All the best!
That is correct, hold I 5 untill you see password menu.
Don,t worry, to hardreset TOTAL computer its different input combination.
Good luck
So i need to prees I + 5 and put battery connector to show that menu right? I ask you because Wednesday i'll be at the equiment.
Thank's a lot !!!!
I checked= Hold I5 and put in batteryconnector, hold I5 until you see password menu.
Parameters will not change.
Thank you, very much! I will follow!
Have a good week!
As far as i know you get a choice menu where you can decide what to reset.
I can check tomorrow on a atlet and let you now.
I remember that is an option to reset menu (passwords also), and keep the configuration so there is no need to reintroduce them... I did it in the past, but how i said i didn't note the steps and i forgot the procedure...
With the procedure you mentioned (I5 or I7) i will lose data configuration?
Thank for your interest acorded!
Try I5 or I7 at startup, you get a choice witch menu you want to reset.
Hi Bud the procedure to reset you have to know all setting that are in the computer because if you don't then it will be more difficult to restart the lift truck, so you best shut is to call your local atlet dealer because on the end you going to call them, for help, that to bad that some s hole change the password so no one can troubleshoot the unit except him or her!! bad bad bad person
I can't acces level 2 service menu (the password has been modified), i know that there is a procedure to reset the password, i did it in the past with asistance from somewone, but i didn't note the steps and i forgot the procedure, and i can't reach anymore the person who guided me..
can you still access 'level 2' service? [default 2468 that you already posted] or can you only reach the 'level 1' service [5's] PW resets are all in the 'level 2' service area if memory serves. I will check my notes. My lift is currently blind (no display) so I can't look through the menus to give hard confirmation. Good luck!
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.