Error codes 5A and 59 - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
Error codes 5A and 59

Does anyone have any luck with resolving this issue?
Not intermittent, code 5A appears when switched on, after self-test and horn beep code 59 appears. Troubleshooting steps passed, suggests replacing both TPA and LPA(unlikely solution) Wires are intact.
5X troubleshooting steps can't be completed because the vehicle is inop.

Posted 26 Sep 2019 19:30
By john_blase
joined 26 Sep'19 - 18 messages
New York, United States

Post a Reply Report this post

Showing items 21 - 25 of 25 results.

Sort messages by:

Have you pulled up the versions on the dispay? Check to see if you can see every one is talking on the Can Bus?

Posted 29 Sep 2019 04:46
By Service_T
joined 5 May'18 - 91 messages
Kansas, United States

ServiceT

Post a Reply Report this post

its a 2011 SB 9700 SWING REACH

Posted 28 Sep 2019 22:40
By john_blase
joined 26 Sep'19 - 18 messages
New York, United States

john blase

Post a Reply Report this post

What year is your lift?

Posted 28 Sep 2019 11:46
By Service_T
joined 5 May'18 - 91 messages
Kansas, United States

ServiceT

Post a Reply Report this post

I am working on the SB 9700.The wiring from the fuse relay and the TM are all good.
The manual has proceedures for the 5x codes but only if errors are intermittent.
These codes appear once you turn on the forklift.

Posted 28 Sep 2019 09:02
By john_blase
joined 26 Sep'19 - 18 messages
New York, United States

john blase

Post a Reply Report this post

Are you working on a 9600? Because a SB does not have a 5A code or LPA / TPA? Have you checked your Can Bus resistance? Check your version through the display.

Posted 28 Sep 2019 03:48
By Service_T
joined 5 May'18 - 91 messages
Kansas, United States

ServiceT

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.