1. Home
  2. Forums
  3. Report post

Report this forum post

if you suspect a faulty seat switch then test it with a vom
you can also "temporarily" bypass it to see if the problem goes away
check the wire harness to it also and make sure it is not damaged

note: when using the bypass method on any safety device "during testing" ALWAYS make sure you restore it to it's proper orientation and make the repair if needed, NEVER leave ANY safety device in a bypass state EVER.
  • Posted 2 Mar 2017 23:23
  • By swoop223
  • joined 23 Mar'12 - 3,691 messages
  • North Carolina, United States
You've been swooped!
swoop223@gmail.com

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Fact of the week
The first practical visible-spectrum LEDs were red, not white. The red colour was the easiest to produce using the semiconductor materials available at the time (the 1960s). The alloy gallium arsenide phosphide (GaAsP) used emitted red light.

Showcased in the Virtual Expo

Movers & Shakers
Dominiek Valcke Dominiek Valcke
Dominiek Valcke
CEO, TVH
Chad Davis
Sales and operations director, Logitrans A/S
Steve Dimitrovski
Director sales for Australia and New Zealand, Swisslog
Michelle Mitchell
General Manager, Forkpro Australia