Ok checked through suggestions with no luck
all fuses are good
I have 12.34v at key
No lift or motor movement when pushing in contactors / buttons / lift lever' whilst handle and door switches engaged.
Battery's are definitely good as they come from my other working fork.
When checking voltage at bridged key terminal i did notice two other wires White with red stripe that were disconnected and taped one had 2910 and the other 2920 printed on them i tried connecting them also no change, Could you advise what they might do also ?
Again all help appreciated
Thanks
Richard
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.