Found the instructions!

- Switch off truck
- Disconnect battery connector
- The convert must discharged; initiate manual discharge process if necessary
- Renew faulty central computer
- Connect battery connector
- Switch on lock switch S1
The following appears on the console display
K - EEPROM VALID?
>>are the console parameters valid?<<
- As the central computer was renewed and the console parameters are therefore required this is answered with YES (PRG <)
Are you sure? YES
- Please wait
- After a successfull data transfer; a reset is automatically initiated.
- By displaying the truck serial number, it can be ascertained whether the correct parameters were loaded.