Hello again,
unfortunately the saga continues...
In my previous post I mentioned that the display was faulty, but I have also send the controller to TVH who checked it said that it's also faulty.
Now I have come to the machine and installed the repaired controller and a new display. The machine turns on and works fine with the first flick of the key.
After 15 minutes of driving and testing the WAVE stops dead with total blackout and smoke coming out of the display!
I have tested the power supply of the display and it's OK. I've checked all the inputs and they seem fine.
What do you think? What caused the damage and what should I check before installing a new display?
The display part number changed from 120204 to 142809.
Is there any technical bulletin regarding this change?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.