Rebuilt rear (ball joints, spider bearings). I had about a quarter turn slop in the steering wheel (steering wheel turns but pitman arm does not. I cranked the thrust screw (one on the side) all the way in and reduced it to about an eighth of a turn. Much better but still pretty sloppy. The up and down of the column is real tight.
Questions: can the gear box be rebuilt or does it have to be replaced?
If I pull the plate off from the side (the one the thrust screw adjuster goes through can I get to the gear parts or do I have to pull the whole thing off?
Thats a pain because the bolts holding it are (as always) real pain to get to.
Has anybody ever rebuilt the gear box?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.