HI all first post.
im working on a crown wp-2335 24v walkie.
intermittenly when you go to drive forward or reverse the motor either does nothing or jerks and hesitates and will run "slow" then ramp up the speed.
other times it works with no issues.
i checed the brake and its working correctely.
also when this issues happens, if you press the "belly button switch" it works with out hesitation,every single time.
also the position of the handle has no effect on the brake system, the handle position switches were replaced about 2 months ago along with the wiring in the handle. not by me by another tech.
no codes and batteries are good.
any ideas or a wiring schematic?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.